| Operating voltage | 230 V 50 Hz |
| Maximum capacity (resistive load) | 3600 W / 16 A |
| Continuous power | 13 A / 3000 W |
| Power consumption | 0.5 W when idle |
| Switch type | Single-pole switch |
| Ambient temperature during use | 5 to 40 °C |
| Ambient temperature during storage | -30 to 70 °C |
| Ambient humidity (rH %) | max. 85 % |
| Measurement accuracy | ± 0.5 K |
| Hysteresis | 0.3 to 3.0 (standard setting 0.5) |
| Field of application | Electrical underfloor heating system / electrical infrared panel / water-based surface heating |
| Floor sensor | 3 metre cable, NTC 10 kOhm |
| Temperature limiter | Floor temperature limitation between 20 and 30 °C (with connected floor sensor) |
| Sensors | Floor sensor, room sensor |
| Type of connection | Connecting terminals |
| Diameter connecting terminals | 0.2 to 2.5 mm² |
| Max. Tightening torque for terminals | 2 Nm |
| Protection type | IP 21 |
| LED signalling | Illuminated in green: standby / illuminated in red: output connected / red flashlight: no sensor connected or malfunction |
| Compatible switch series | Several series of the manufacturers: Berker, Gira, Kopp, Busch-Jäger, Jung, Merten, and many more. |
| Colour | White (RAL 9003) |
| Dimensions (w x h x d) without frame | 55 x 55 x 23 mm |
| Weight | 109 g |
| Customs tariff number | 90321020 |
| Scope of supply | Room thermostat EAZY Multi Thermostat Analogue, floor sensor, frame, operating instructions, setpoint controller °C + 1-10 |
